Samm-mootorid
- Arendusplaadid
- Laiendusplaadid ja tarvikud
- Tark kodu
- Komplektid
- Robotid
- Toide
- Andurid ja nende tarvikud
- Mootorid, rattad ja reduktorid
- Mootorite juhtmoodulid
- Ekraanid ja näidikud
- Juhtmevaba side moodulid
- Muundurid
- Nupud ja juhtkangid
- Pistikud ja pesad
- Mikrokontrollerid
- Programmaatorid
- Kaablid
- Komponendid
- Mõõteseadmed ja tööriistad
- MakerBeam
- Autoelektroonika
- Tööstuselektroonika
- Kirjandus
- Kingitused
- Kasutatud asjad
Samm-mootor NEMA 17, 28cm kruvilatiga
79,30 €
Maksudega
MM55
0
Specifications
- Size: 42.3 mm square × 38 mm, not including the shaft (NEMA 17)
- Shaft diameter: 8 mm threaded rod
- Steps per revolution: 200
- Linear step size: 40 µm (1.6 mil) per full step
- Current rating: 1.68 A per coil
- Voltage rating: 2.8 V
- Resistance: 1.65 Ω per coil
- Holding torque: 3.7 kg-cm (51 oz-in)
- Inductance: 3.2 mH per coil
- Lead length: 16 cm (6.5″)
- Output shaft supported by two ball bearings
More specifications are available in the datasheet (63k pdf). Note that while the datasheet is for the stepper motor with 28 cm lead screw, the only difference between the three versions is the length of the lead screw.
Dimensions
The following diagram shows the stepper motor, lead screw, and traveling nut dimensions in mm. The value of L
is 182 mm for the stepper motor with 18cm lead screw, 282 mm for the stepper motor with 28cm lead screw, and 382 mm for the stepper motor with 38cm lead screw. Note that the datasheet incorrectly labels the threaded rod as “TR8×3”; it is really a TR8×2 rod (the threading has a 2 mm pitch).