Hello !

Differences

This shows you the differences between two versions of the page.

--- en:examples:setup:eclipse:install:linux [2012/05/29 14:38] – created raivo.sell
+++ en:examples:setup:eclipse:install:linux [2020/07/20 12:00] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
+====== Installing Eclipse for Linux ======
+This section describes how to install and use AVR development environment in Linux Ubuntu operation systems. For installation software repository of Robotic HomeLab is used.
+===== Software automatic installation =====
+**1. Software source setup**
+For source setup HomeLab-keyring software package must be downloaded and installed.
+Download it from webpage:
+[[http://www.roboticlab.eu/repo/ubuntu/dists/oneiric/main/binary-all/misc/homelab-keyring_2012.02.26-1_all.deb|homelab-keyring]]. Next, Internet browser will open a window where opening package installation with automatic installation manager can be selected.
+{{  :kit:repo2.png?400  |}}
+If you select the correct option the manager will open (Ubuntu 10.04 example).
+{{  :kit:repo3.png?400  |}}
+Ubuntu 10.10 and newer "Ubuntu Software Center" will popup.
+{{  :kit:repo3maverick.png?400  |}}
+Press "Install package" for installation and enter root password.
+{{  :kit:repo4.png?400  |}}
+If the installation has finished close the manager.
+{{  :kit:repo5.png?400  |}}
+As a conclusion you have successfully installed Robotic Homelab software source.
+**2. Robotic HomeLab software installation**
+To install Robotic HomeLab software in Gnome choose from menu: //Applications -> Programming -> Install Homelab//
+{{  :kit:repo6.png?400  |}}
+In case of Unity start typing: //homelab// in Dash
+Enter root password when asked.
+{{  :kit:repo4.png?400  |}}
+If the password is correct terminal window will open and software installation will begin. If not installation will not start. Setup can be started later again if first attempt was unsuccessful.
+{{  :kit:repo7.png?400  |}}
+Software installation might take some time from few minutes to a quarter of hour depending on your Internet connection and computer speed.
+As a result the following software packages will be installed:
+  * HomelabSetup - HomeLab configuration program
+  * Eclipse-CDT - development environment
+  * gcc-avr – GNU C-language compiler for AVR platform
+  * avrdude – program for loading HEX to microcontroller
+  * avr-libc – C-language libraries for code writing into AVR platform
+  * libhomelab - HomeLab library
+  * hlflash - HomeLab flashing program
+  * hlflash-gui - HomeLab flashing GUI
+  * hlinit - HomeLab initialization program
+Terminal will close after installation of these software packages.
+Robotic HomeLab software is now successfully installed!
+===== Software manual installation =====
+In case automatic installation fails at some reasons required software packages can be also installed manually.
+ **1. At first add Robotic HomeLab repository through terminal into Ubuntu package manager. **
+The following line can be copied into terminal to do this:
+<code>
+sudo add-apt-repository http://roboticlab.eu/repo/ubuntu/
+</code>
+ **2. GnuPGP key installation **
+Because of all Robotic HomeLab software packages contain GnuPGP key for validation you also need to install corresponding public key into your computer.
+Download key from webpage: {{:et:examples:setup:homelab-keyring.gpg.zip|}}
+Extract archive using user interface or terminal.
+Corresponding command in terminal:
+<code> unzip homelab-keyring.gpg.zip </code>
+Then add this key into Ubuntu package manager. When in folder that contains homelab-keyring.gpg type:
+<code>sudo apt-key add homelab-keyring.gpg</code>
+ **3. Download all software updates. **
+Use the following line for update :
+<code>
+sudo apt-get update
+</code>
+After downloading updates the following software packages are required to be installed:
+  * eclipse
+  * eclipse-cdt
+  * urjtag-homelab
+  * hlflash
+  * hlinit
+  * hlflash-gui
+  * libhomelab
+  * avrdude-homelab
+  * eclipse-avr
+Copy this line into terminal for installation:
+<code>
+sudo apt-get install eclipse eclipse-cdt urjtag-homelab hlflash hlinit hlflash-gui
+libhomelab avrdude-homelab eclipse-avr
+</code>
+After completing installation of those software packages Robotic HomeLab is successfully installed!
+To create new project and configure floating-point variables look at the instructions for Eclipse setup.