Differences

This shows you the differences between two versions of the page.

--- en:iot:examples:setup:wireless [2017/12/01 15:04] – Somepub
+++ en:iot:examples:setup:wireless [2020/07/20 12:00] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
+====== Wireless ======
+<note>When connecting device with wireless connection (WIFI), you need to have a MQTT server.</note>
+For connecting device with WIFI, download the [[https://home.roboticlab.eu/download/IoTConfiuration.apk|ITT IoTConfiuration application]].
+  * **Power on IoT esp by USB cable**
+  * **Connect your phone to IoT esp wireless network**
+If IoT esp was configured before and connected to the server, then make sure when configuring again,
+that you need to leave the current WIFI range where the device was connected.
+{{:en:iot:examples:setup:24271592_1760196944015083_291179072_o.jpg?300|}}
+  * **Open IoTConfiuration application**
+  * **Wait few seconds**
+If device doesn't connect, make sure IoT-device WIFI is connected, or try closing and restarting the application.
+__Not connected:__
+{{:en:iot:examples:setup:24281648_1760201574014620_159275143_o.png?300|}}
+__Connected:__
+{{:en:iot:examples:setup:24208936_1760197054015072_537451988_o.png?300|}}
+* **Connect to your network**
+{{:en:iot:examples:setup:24197459_1760197140681730_1145219138_o.png?300|}}
+* **Configure**
+{{:en:iot:examples:setup:24259727_1760197227348388_762711517_o.png?300|}}
+* **Add custom value if needed **
+{{:en:iot:examples:setup:24271024_1760197250681719_2065720618_o.png?300|}}
+{{:en:iot:examples:setup:24271350_1760197277348383_1964500720_o.png?300|}}
+* **Press save and Restart esp**
+{{:en:iot:examples:setup:24281605_1760197534015024_126221271_o.png?300|}}
+* **Wait atleast 1 min for IoT esp connecting to the server**
+**If IoT esp disables the configure mode WIFI then the device is successfully connected to the server. If not and the configure mode WIFI is still enabled, try:**
+  - Make sure configure parameters where right (MQTT Server IP,MQTT login,Device name,etc)
+  - Make sure no spaces are between parameters
+  - Make sure device name is unique
+  - Try without  adding a value
+  - Leave the wifi area and try again