Differences

This shows you the differences between two versions of the page.

--- en:hardware:arm-can:user_interface [2010/05/28 11:07] – mikk.leini
+++ en:hardware:arm-can:user_interface [2020/07/20 12:00] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
+====== User-interface ======
+[{{  :images:hardware:arm-can:modules:user-interface_enclosure.jpg?250|User-interface module}}]
+/*
+[{{  :images:hardware:arm-can:modules:user-interface.jpg?250|User-interface}}]
+[{{  :images:hardware:arm-can:userinterface_pcb_1.jpg?250|User-interface front view}}]
+[{{  :images:hardware:arm-can:userinterface_assembled.jpg?250|User-interface in enclosure}}]
+[{{  :images:hardware:arm-can:userinterface_board_1.png?250|Rendered view}}]
+*/
+===== Features =====
+**LCD**
+  * Nokia 6610 LCD
+  * 132 x 132 pixels
+  * 4096 colors
+  * 6 Mbit SPI interface
+  * StellarisWare Graphics Library driver
+**Inputs**
+  * 2 axis sliding joystick
+  * 2 push-buttons
+**Speaker**
+  * 0.5 W
+  * 95 db at 10 cm
+  * 800 Hz resonant frequency
+  * Driven by PWM signal with digital amplifier
+**Physical**
+  * Dimensions 70 x 60 x 15 mm
+  * Weight ~50 g
+  * Optional housing
+===== Connector =====
+[{{  :images:hardware:arm-can:connectors:userinterface_connectors.png|User-interface connectors}}]
+ARM-CAN User-interface connects only to the controller board with COMM connector. This one and only connector has all the pins necessary to use with on-board LCD, buttons, speaker and joystick. The correct way to look at the user-interface is shown in the illustration on the right.
+~~CL~~
+===== COMM =====
+[{{:images:hardware:arm-can:connectors:userinterface_communication.png|COMM connector}}]
+~~CL~~
+Both the controller and user-interface COMM connectors are identical, except the names of the pins are different. Blue colored names represent microcontroller pin names to help use features.
+~~CL~~
+/*
+===== Schematics =====
+  * {{:datasheets:arm-can:userinterface.pdf|Schematics}}
+*/