Hello !
Trace: • SmartMe Network Laboratory: Arduino Nodes 1-5 • B1: Basic operations on the 4x20 LCD screen • B6: Presenting air pressure on the LCD • B8: Controlling fan using PWM • B7: Controlling servo • ITT Relay module • VREL #8 through #11: General Purpose IoT Laboratory with air chamber for pressure monitoring • OLED display module: Displaying messages • Controller module (ATmega128) modification • Safety

Old Revisions

These are the older revisons of the current document. To revert to an old revision, select it from below, click Edit this page and save it.

  • 2019/08/05 10:51 Show differences to current revisions en:iot-open:data:prova – Agrisnik ±0 B
  • 2019/05/25 23:00 Show differences to current revisions en:iot-open:data:prova – irena.skarda ±0 B
  • 2019/05/25 22:54 Show differences to current revisions en:iot-open:data:prova – irena.skarda ±0 B
  • 2018/12/27 12:53 Show differences to current revisions en:iot-open:data:prova – external edit 127.0.0.1 ±0 B
  • 2018/09/04 11:03 Show differences to current revisions en:iot-open:data:prova – pczekalski ±0 B
  • 2018/07/09 20:45 Show differences to current revisions en:iot-open:data:prova – pczekalski ±0 B
  • 2018/05/12 14:54 Show differences to current revisions en:iot-open:data:prova – created salvatdi ±0 B
en/iot-open/data/prova.txt · Last modified: 2020/07/20 12:00 by 127.0.0.1
CC Attribution-Share Alike 4.0 International
www.chimeric.de Valid CSS Driven by DokuWiki do yourself a favour and use a real browser - get firefox!! Recent changes RSS feed Valid XHTML 1.0