Raadiomoodul SRF-SMD 868 MHz
  • Raadiomoodul SRF-SMD 868 MHz
  • Raadiomoodul SRF-SMD 868 MHz

Raadiomoodul ARF 868 MHz

48,80 €
laos, Tallinnas

Product description

The ARF  can be used in point to point and multipoint applications. The ARF has a new style foot print where the device can be used with or without pins. The module is a combination of the SRF (with serial firmware) and a high power amplifier to give ultimate range. The ARF like the whole family can talk to ERF, URF, SRF, XRF etc.

The device can be SMT/SMD surface mounted or you can solder on 2 x 2mm single in line 10 way male headers (a pair are supplied with the ARF) this gives you a module that can be pluged into an XRF/XBee style interface. It works really well in our USB interface which has a knock out in the back panel for an SMA pigtail which is included in with the ARF. It will work between 868-915Mhz (default config is 868.3Mhz), there is no 315/433 option for the power amp from the manufacturer.

When used with an XRF the gain overall is around 10db, using an ARF at both ends will give the greatest range (expected to be 10's Km's).

At this power you need to be very aware of your local legislation on power output and duty cycle. Adding large gain parabolic antennas might get you beyond 100Km but to our knowledge this will exceed the limits set out in all countries, so don't do it.


  • Improved range on the XRF
  • Supplied with headers that can be mounted so it fits on XRF/XBee style inbterface
  • Made in the UK


  • ARF
  • 2mm 10way Headers x2
  • U.FL pigtail
  • 868Mhz Duck anteanna

Technical data

Dimensions: 33.5mm x 24.5mm x 3.5mm