Wireless programmer for Arduino

Getting tired of plug and unplug the USB cable when you debugging the Arduino project? This wireless programming module is designed for wireless upload skectch/codes to Arduino. With up-to 5 meters range, you can bring your laptop and do a wireless programming for your already deployed Arduino based devices which is hard to open.  Cut the wire, and try this superb communication module.  

This module can also be used as a standard bidirectional wireless communication module with up to 20 meters range  and 115200 bps speed(line in sight). When uses as communication modules, it exchanges data as a transparent serial port.  Only Tx/Rx will be required to do the transmission.

• Suitable for outdoor Arduino based devices. 

• Suitable for Arduino based robots.
• Suitable for thoese devices which are hard to reach.

Its pin out is compatible with XBEE socket.  You will need at least a Xbee Adapter and one of the following shield to perform the wireless programming.

NOTE:

1. You will need a pair of this module to perform wireless programming. 

2. It's not compatible with Arduino Leonardo series processor.

It is compatible with:

• DFRduino Duemilanove
• DFRduino Mega(1280)
• Romeo v1.1
• Arduino Uno
• Arduino Duemilanove or Nano w/ ATmeg328
• Arduino Diecimila,Duemilanove,or Nano w/ ATmega168
• Arduino Mega (ATmega1280)
• Arduino Mini
• Arduino BT w/ ATmega328/168
• LilyPad Arduino w/ ATmega328/168
• Arduino Pro or Pro Mini (5V,16MHz) w/ ATmega328/168
• Arduino Pro or Pro Mini (3.3V,8MHz) w/ ATmega328/168
• Arduino NG or older w/ ATmega168/ATmega 8

Specification

• Supply Voltage:3.3V
• Working current: 10mA
• Working Temperature: 0 - 70 C
• Interface: UART (TTL)
• Support Baud Rate:1200/2400/4800/9600/14400/19200/28800/38400/57600/115200
• Communication Range: 20 Meters (line in sight)
• Frequency Band:2.4Ghz 

Documents

• Wiki doc
• Configuration Tools Software (024 windows) 
• Latest Software(Beta)